KL-3060 / KL-3080
KL-30120 / KL-30160
KL-30200 / KL-30240 |
| WORKING CAPACITY |
| Swing over bed |
770 mm |
| Center height to bed |
385 mm |
| Center height to top cross slide |
250 mm |
| Swing over cross slide |
500 mm |
| Dis. Between centers |
1600 mm / 2100 mm / 3100 mm
4100 mm / 5100mm / 6000 mm |
| Width of bed |
450 mm |
| HEADSTOCK |
| Spindle nose |
D1-8 * |
A2-11 * |
A2-11 |
A2-15 |
A2-20 |
| Spindle bore |
85 mm (3.34”) |
105 mm (4") |
153 mm (6") opt |
230 mm (9") opt |
305 mm (12") opt |
| 3-Jaw scroll chuck (Option) |
Ø10” (thr. hole 76 mm) for D1-8 spindle nose only
Ø 12” 3-jaw scroll chuck (thr. hole 103 mm)
Ø 16” 3-jaw scroll chuck (thr. hole 155 mm)
Ø 20” 3-jaw scroll chuck (thr. hole 160 mm)
Ø 25” 3-jaw scroll chuck (thr. hole 200 mm) |
Hydraulic Power chuck
(Opt.) |
Ø 10” (thr. hole 75 mm) for D1-8 spindle nose
Ø 12” (thr. hole 105 mm) for A1-11 spindle nose
Ø 15” (thr. hole 117.5 mm) for A2-11 spindle nose,
Ø 18” (thr. hole 117.5 mm) for A2-11 spindle nose,
Ø 24” (non thr. hole) for A2-15 spindle nose, |
Bar capacity (Power chuck)
(Opt.) |
Ø 75 mm for D1-8 of 10” chuck,
Ø 91 mm for A1-11 of Ø 12” chuck,
Ø 117.5 mm for A1-11 of Ø 15” chuck and Ø 18” chuck |
| Range of spindle speeds |
3 Rang Gears Auto Shifting |
| Spindle speeds range |
H: 2000 - 491 rpm
M: 490 – 126 rpm
L : 125 – 25 rpm |
H: 1500 - 331 rpm
M: 330 – 93 rpm
L: 92- 24 rpm |
H: 800 - 176 rpm
M: 175 – 59 rpm
L: 58- 12 rpm |
H: 450 - 108 rpm
M: 107 - 31rpm
L: 30- 6rpm |
H: 350 - 87rpm
M: 86- 26rpm
L: 25- 5rpm |
| Taper in spindle |
MT# 6 |
| SADDLE |
| Longitudinal travel (Z-axis) |
1300mm / 1800mm / 2800mm
3800mm / 4800mm / 5800 mm |
| Cross-slide travel |
450 mm |
| Size of tool holder |
32 mm |
| Ball screw (Dia x pitch) |
X-Axis: Ø25 mm x P 5 mm, Z-Axis: Ø50 mm x P10 mm |
| TAILSTOCK |
| Quill Diameter |
Ø 105 mm |
| Quill Travel |
220 mm |
| Quill Taper |
MT #5 |
| MOTOR |
| Spindle motor |
20 HP (Std.), 30 HP (option) |
| Z-axis drive motor |
12 Nm (FKM 44.3) |
| X-axis drive motor |
6.3 Nm (FKM 42.3) |
| Coolant pump motor |
1/4 HP – Std, 3/4 HP (Opt.) |
| High Pressure coolant |
1-1/2 HP (Opt. for U drills) 6 bar |
| X, Z- AXES FEED |
| X axis rapid travel |
6 M /min |
| Z axis rapid travel |
8 M /min |
| GENERAL |
| Power Required |
20 KVA |
| Floor space (L x M x H) |
3590/4090/5090/6090/7090 x 1950 x 1820 mm |
| Approx, machine weight |
4500kgs / 5000kgs / 6000kgs
7000kgs / 8000kgs / 9000 kgs |
