| KL-1640 |
| CAPACITY |
| Height of centers |
200 mm |
| Swing over bed |
400 m |
| Swing over cross slide |
200 mm |
| Distance between center |
1000 mm |
| Width of bed |
300 mm |
| SADDLE |
| Longitudinal travel (Z) |
750 mm |
| Cross slide travel (X) |
210 mm |
| HEADSTOCK |
| Spindle Nose |
D1-6 (STD) |
| Spindle bored (standard) |
Ø 55 mm (2-1/8”) |
| Spindle bored (optional) |
---- |
| Taper of S/Nose & center |
MT No.6 x No.4 for D1-6, MT No.7 x No.5 for D1-8 |
| 3-Jaw scroll chuck (Option) |
Ø 200 mm (8”) for D1-6, Ø 250 mm (10”) for D1-8 |
| Hydraulic Power chuck (Opt.) |
Ø 200 mm (8”) for D1-6, Ø 250 mm (10”) for D1-8 |
| Bar capacity (Power chuck) |
Ø 45 mm for D1-6 of 8” chuck, Ø 75 mm for D1-8 of 10” chuck, Ø 91 mm for A1-11 of Ø12” chuck |
| Range of spindle speeds |
2 Gears |
| Spindle speed (variable) |
D1-6:
H: 3000-436
L : 435 - 60 |
| INDEXING TURRET (OPTIONAL) |
| Turret tool station |
8 station |
| Standard O.D. tool size |
20 mm (3/4”) |
| I.D. tool size (Max..) |
20 mm (3/4”) |
| TAILSTOCK |
| Tailstock quill travel |
160 mm |
| Tailstock quill diameter |
52 mm |
| Tailstock quill taper |
No.4 MT |
| MOTOR |
| Spindle drive motor (AC) |
7.5 HP |
| Feed Motor torque (Z-X) |
12 Nm (Z) / 6 Nm (X) Nm |
| Coolant pump |
1/8 HP, (1/4 HP: up to 2000 mm center distance) |
| Rapid traverse (Z-X) |
8,000 mm/min (315 ips) |
| Cutting federate (Z-X) |
1-4000 mm/min (0-157 ips) |
| ACCURACY |
| Positioning |
±0.010/300 mm (±0.0004/12”) |
| Positioning repeatability |
±0.005/300 mm (±0.0002/12”) |
| Power required |
16 KVA |
| Approx. Machine weight (kg) |
2000 |
